Kalmar Global

Finland|Industrial Machinery & Equipment|FY2025|Auditor: Ernst & Young Oy|View original report →

Sustainability statement, in full

The complete text of Kalmar Global’s FY2025 sustainability statement is held here – 115 pages, captured from the published report. Every disclosure below also links to its own passage.

ESRS 2 – General Disclosures

GOV-1The role of the administrative, management and supervisory bodies
Reported

The role of the administrative, management and supervisory bodies

Reference: page 43. Index lists GOV-1 and paragraph 21 (d) and (e) at page 43.

Kalmar's Board of Directors has eight non-executive members (38% women, 62% men), all independent of the company. The statement says the Board "holds ultimate responsibility for overseeing the management of environmental, social and governance aspects" (page 43), and a designated Board member oversees sustainability impacts, risks and opportunities and keeps the Board informed. The Board approves the material sustainability topics, the sustainability targets and the Code of Conduct. "Kalmar employees or other workers are not represented at the Board."

The Audit and Risk Management Committee (ARC), at least three Board members, reviews sustainability reporting, internal controls and sustainability-related risks within enterprise risk management. The Leadership Team (11 members including the CEO) approves sustainability policies and targets and decides on resourcing; the Senior Vice President Strategy, Sustainability & Technology oversees target setting and actions. In 2025 the Board and the Leadership Team received a sustainability training programme (page 43).

GOV-2Information provided to and sustainability matters addressed by the undertaking's administrative, management and supervisory bodies
Reported

Information provided to and sustainability matters addressed by the undertaking's administrative, management and supervisory bodies

Reference: pages 43-44.

Under Kalmar's governance model the Board reviews sustainability matters, including impacts, risks and opportunities, three times a year, with deep dives into specific topics (page 43). In 2025 the Board completed a five-module sustainability training programme and sustainability matters "were formally reviewed twice during the year": one review focused on safety and the second approved the 2026 sustainability targets and monitored progress against current commitments (page 44).

The ARC and the Kalmar Leadership Team are meant to receive sustainability updates four times per year. The ARC briefings followed this model in 2025; the Leadership Team addressed sustainability on three occasions and reviewed safety four times (page 44). The Head of Ethics & Compliance or the General Counsel updates the Board annually on potential Code of Conduct violations, gives the ARC quarterly updates on anti-corruption activity and investigations, and chairs a bimonthly Code of Conduct panel with the Leadership Team (page 44).

GOV-2(was GOV-3)Integration of sustainability-related performance in incentive schemes
Reported

Integration of sustainability-related performance in incentive schemes

Reference: pages 44-45.

Kalmar has three active Performance Share Plans, all with sustainability criteria (page 44):

  • PSP 2023-2025 includes eco portfolio order intake, which covers one third of the plan.
  • PSP 2024-2026 and PSP 2025-2027 both include CO2 emissions reductions and improvement of gender diversity in senior and leadership positions; these criteria cover 20 percent of each plan.

The Personnel and Remuneration Committee prepares the Remuneration Policy and Remuneration Report and reviews the performance evaluation and remuneration of the CEO and Leadership Team (page 44). The Remuneration Policy "includes guidance on setting sustainability performance measures", which can be environmental, social or governance measures in short- and long-term incentives (page 45). Rewards are paid after the performance period if employment continues. The statement describes the criteria and weights but does not give the share of total variable remuneration they represent.

GOV-3(was GOV-4)Statement on due diligence
Reported

Statement on due diligence

Reference: page 45. Index lists GOV-4 and paragraph 30 at page 45.

Kalmar states that it "conducts due diligence to identify, address and track its impacts on people and the environment" and maps the core due diligence elements to the sections of the statement (page 45):

  • Embedding due diligence in governance, strategy and business model: ESRS 2 GOV-2, GOV-3, SBM-3; E1-2; E5-1; S1-1; S2-1.
  • Engaging with affected stakeholders: ESRS 2 GOV-2, SBM-2, IRO-1; S1-2; S2-2.
  • Identifying and assessing adverse impacts: ESRS 2 IRO-1.
  • Taking action: E1-1, E1-3; E5-2; S1-2, S1-4; S2-2, S2-4.
  • Tracking effectiveness and communication: E1-4 to E1-6; E5-3 to E5-5; S1-5, S1-6, S1-7, S1-9, S1-13, S1-14, S1-16, S1-17; S2-5.

The mapping is a signposting table; the statement does not set out due diligence as a single narrative.

GOV-4(was GOV-5)Risk management and internal controls over sustainability reporting
Reported

Risk management and internal controls over sustainability reporting

Reference: pages 42, 45. Index lists GOV-5 at page 45.

Kalmar's Sustainability Team consolidates the statement, with subject matter experts supplying and reviewing content. The statement names two main reporting risks: "Data accuracy, especially related to human error, when entering data into the management systems" and "The dependency of certain parts of the reporting process on one person" (page 45).

Controls include system approval of environmental data first by subject matter experts and then by group-level sustainability experts, automatic detection of significant deviations, segregation of duties, access controls, reviews and approvals and documented processes. A new reporting tool was implemented in 2025 to increase automation and reduce human error. Kalmar considers its sustainability reporting processes "to be on a good level, with sufficient internal controls". Separately, page 42 discloses that Q4 2025 energy and waste data rest on estimates from Q4 2024 because of supplier invoicing delays (BP-2).

SBM-1Strategy, business model and value chain
Reported

Strategy, business model and value chain

Reference: page 46.

Kalmar supplies heavy material handling equipment and services to ports and terminals, distribution, manufacturing and heavy logistics: reachstackers, forklift trucks, empty container handlers, terminal tractors, straddle carriers and spreaders, plus spare parts, maintenance and lifecycle services (page 45). 2025 sales were EUR 1,741 million: EUR 1,137 million equipment and EUR 602 million service (page 46).

Kalmar had 5,300 employees at the end of 2025 (EMEA 3,367, APAC 1,430, Americas 503), sells in over 120 countries and has legal entities in more than 30 (page 46). It runs four assembly sites (Poland, USA, Malaysia, China) and two innovation centres (Finland, Sweden) on an asset-light, mainly assembly-only model. Principal inputs are steel structures, motors, electronic components, cables, tyres, hydraulics, drive trains and batteries from third-party suppliers. The eco portfolio was 44% of sales in 2025 (2024: 41%) and 43% of order intake (2024: 46%) (page 46). The index marks the SBM-1 datapoint paragraph 40 (d) i to iv "not material" (page 94).

SBM-2Interests and views of stakeholders
Reported

Interests and views of stakeholders

Reference: pages 46-47.

Kalmar names employees, customers, shareholders and investors, suppliers and dealers as main stakeholders, identified by their potential influence on Kalmar and Kalmar's potential impact on them. Research and educational institutions, industry associations, local communities and the media are additional groups (pages 46-47). The Board approves the double materiality assessment, which "incorporates the interests and views of stakeholders as critical input" (page 47).

A table sets out engagement by group (page 47): annual and quarterly employee engagement surveys, performance discussions and town halls for employees; direct customer meetings and feedback for customers; investor meetings, roadshows and financial communication for shareholders; supplier self-assessments and audits; dealer onboarding, bi-annual dealer events and training. The statement does not say how stakeholder views changed the strategy or business model, beyond the purposes listed per group.

SBM-3Material impacts, risks and opportunities and their interaction with strategy and business model
Reported

Material impacts, risks and opportunities and their interaction with strategy and business model

Reference: pages 48-49, with topic-level SBM-3 tables at pages 54, 62, 73, 84 and 89.

Kalmar's material topics are climate change; resource use and circular economy; health and safety; fair treatment and opportunities for all; business conduct; and responsible sourcing (page 48). A table marks each sub-topic as material from the own-operations and/or value-chain perspective: energy and climate mitigation, resource inflows and product outflows material in both; waste outflows material in the value chain only; S1 health and safety and fair treatment sub-topics (gender equality and equal pay, violence and harassment, diversity, training) material in own operations; S2 health and safety, working time, adequate wages and forced labour material in the value chain; G1 corporate culture and corruption and bribery material in both, supplier relationships in own operations (page 48).

The statement says "climate change and circularity are considered the biggest business drivers" and have influenced strategy the most; climate ambition is net zero by 2045 (page 48). Impacts, risks and opportunities are listed under each topical standard.

IRO-1Description of the processes to identify and assess material impacts, risks and opportunities
Reported

Description of the processes to identify and assess material impacts, risks and opportunities

Reference: pages 49-53.

Kalmar runs a double materiality assessment (DMA) owned by the Vice President Sustainability and approved by the Leadership Team and the Board. Impacts are scored on severity (scale, scope, irremediability) and likelihood; risks and opportunities on magnitude and likelihood, using the enterprise risk management process (pages 49-50). An impact is material at a rating of four or above (out of five); a risk or opportunity at three or above, and the statement notes the financial threshold was set lower "to ensure that at least some risks and opportunities exceed the financial materiality threshold" (page 50).

In 2025 Kalmar reassessed the 2024 DMA: some previously material risks fell below the threshold and new impacts, for example from the human rights assessment, were added (page 49). Topic screening covered climate (GHG Protocol screening and a 2024 scenario analysis, pages 50-51), biodiversity (ENCORE tool, page 52), pollution and water (found in the supply chain but "not been deemed material", page 53), human rights and business conduct (page 53).

Climate-specific risk identification and scenario analysis is also presented under E1-2 (2025 ESRS numbering).

IRO-2Disclosure requirements in ESRS covered by the undertaking's sustainability statement
Reported

Disclosure requirements in ESRS covered by the undertaking's sustainability statement

Reference: pages 94-95.

Kalmar publishes a CSRD Content Index headed "Disclosure requirements in ESRS covered by the undertaking's sustainability statements and related data points (IRO-2)". Each row carries a status marker (material or not material), the page and, for datapoints from other EU legislation, the paragraph number. The index lists ESRS 2 (BP-1, BP-2, GOV-1 to GOV-5, SBM-1 to SBM-3, IRO-1, IRO-2), E1-1 to E1-6, E5-1 to E5-5, S1-1 to S1-7, S1-9, S1-13, S1-14, S1-16, S1-17, S2-1 to S2-5 and G1-1 to G1-4 with page numbers (pages 94-95).

Datapoints marked "not material" in the index include E1-7 paragraph 56, E1-9 paragraphs 66, 66 (a), (c), 67 (c) and 69, E2-4 paragraph 28(c), E3-1 and E3-4 datapoints, ESRS 2 IRO-1 for E4, E4-2 datapoints, S3-1 and S3-4 and S4-1 and S4-4 datapoints (pages 94-95). This file treats a DR as reported only where the index lists it with a page.

E1 – Climate Change

E1-1Transition plan for climate change mitigation
Reported

Transition plan for climate change mitigation

Reference: pages 55-56. Index lists E1-1, paragraph 14 (p.55) and paragraph 16 (g) (p.56).

Kalmar's SBTi-approved targets are to cut scope 1 and 2 emissions by at least 90% and scope 3 by at least 40% by 2030 against 2023, with net zero by 2045; the 1.5°C alignment is stated (page 55). Value chain emissions are over 99% of the total: use of sold products about 77% and upstream purchased goods and services about 19% (page 55). A waterfall on page 56 shows 3,131 ktCO2e in the base year, planned reductions from fossil-free electricity and heating, low-emission fuels and vehicles, low-emission steel, supplier reduction, eco-efficiency in diesel equipment and HVO, and use-phase reductions from electric equipment.

Kalmar allocates about 30% of R&D investment to electric equipment (page 55). It acknowledges locked-in emissions from assets, diesel equipment and steel and says the use-phase actions "are very dependent on the market situation" (page 56). The roadmap is approved by the Board and Leadership Team and is "embedded in the general business strategy and financial planning"; the company states it is not excluded from the EU Paris-aligned Benchmarks (page 56).

E1-2(was covered under ESRS 2 IRO-1)Identification of climate-related risks and scenario analysis
Reported

Identification of climate-related risks and scenario analysis

Back-filled from ESRS 2 IRO-1, where this content is disclosed in the FY2025 report (pages 50-52). This disclosure requirement did not exist under the 2023 ESRS the report was prepared against.

Scenario analysis performed in 2024 (page 50). Favourable scenario: warming limited to 1.5°C, following "the IPCC RCP 2.6 carbon emission pathway" (SSP1-2.6), complementing the IEA Net Zero Emissions by 2050 scenario. Unfavourable scenario: business as usual with 4°C warming on the IPCC RCP 8.5 pathway (SSP5-8.5) (pages 50-51). The report states a global warming figure for each scenario (1.5°C and 4°C) but gives no further temperature projection detail.

Horizons and scope (page 51): the long term extends to 2050; Kalmar defines short term as under one year, medium term 1-5 years and long term over 5 years. The analysis covers transition and physical risks, policy, legal, technological and societal aspects, and both own operations and the value chain.

Findings: material climate-related risks are transitional (page 54): uncertain demand for pricier low-carbon products and competition in electric equipment. Physical risk: flooding at Gdynia and Shanghai, tornadoes at Ottawa and rising temperatures at Ipoh, "unlikely in the short to medium term" (page 52). Supply chain disruption, mainly China, is also identified (page 52). Key assumptions are described only qualitatively.

E1-3(was covered under ESRS 2 SBM-3)Resilience in relation to climate change
Reported

Resilience in relation to climate change

Back-filled from ESRS 2 SBM-3, where this content is disclosed in the FY2025 report (page 55, drawing on the IRO-1 scenario analysis at pages 50-52). This disclosure requirement did not exist under the 2023 ESRS the report was prepared against.

Kalmar states that it "has analysed the climate resilience of its strategy and business models by conducting scenario analysis" covering own operations and the value chain, and "considered its strategy and business model resilient regardless of the future warming pathway" (page 55). Electrification, renewable energy and circular economy are named as development patterns in both the favourable and unfavourable scenarios and are integrated into strategy; the assessment "reaffirmed the strategic decision to prioritise and focus on the development of electric and low-emission products" (page 55).

On assets: "In case of escalating climate change, Kalmar has not identified its current assets or business activities as being at significant risk" (page 55). Business continuity plans are described as essential for supply chain disruption (page 52). The statement does not describe uncertainty in the analysis, nor quantify the capacity to adapt, and the analysis is dated 2024 with no 2025 update stated (page 50).

E1-4(was E1-2)Policies related to climate change mitigation and adaptation
Reported

Policies related to climate change mitigation and adaptation

Reference: pages 57, 63.

Kalmar's Code of Conduct reinforces the commitment to act on climate change mitigation and to limit warming to 1.5°C, applies to all employees in all divisions and is approved by the Board; it is available in 20 languages (page 57). The Sustainability Policy, approved by the Leadership Team, covers climate change mitigation, climate change adaptation, energy efficiency and increased use of renewable energy across the whole value chain; the Senior Vice President Strategy, Sustainability and Technology is accountable (page 57).

The Business Partner Code of Conduct encourages partners to monitor, report, set targets for and reduce their GHG emissions and to measure the carbon footprint of their products; it is part of supplier contracts and purchase conditions, and the Vice President Sourcing is accountable (page 57). The policies are public on kalmarglobal.com and confirm commitment to the UN Global Compact, OECD Guidelines, UN Guiding Principles and ILO Declaration (page 57).

E1-5(was E1-3)Actions and resources in relation to climate change policies
Reported

Actions and resources in relation to climate change policies

Reference: page 57. Index lists E1-3 at page 57; transition plan actions are at pages 55-56.

Actions in 2025 (page 57):

  • Upstream: Bromma delivered its first yard spreader made with SSAB Hybrit steel, 65% of the spreader's steel, giving a 9.5 tCO2e reduction, 55% lower manufacturing emissions and 38% lower lifetime emissions. New lithium iron phosphate (LFP) batteries replaced nickel manganese cobalt batteries in high voltage electric vehicles.
  • Downstream: sales training and sales tools to boost eco portfolio sales.
  • Own operations: the Ljungby and Tampere innovation centres switched to fossil-free district heating, expected to cut about 11 and 99 tCO2e a year; Ottawa replaced LPG forklifts with electric ones (about 44 tCO2e a year); Shanghai started the same (about 28 tCO2e a year), with Ipoh and Stargard to follow from 2026.

The statement quantifies expected emission effects but gives no capex or opex amounts for the actions, which E1-3 asks for.

E1-6(was E1-4)Targets related to climate change mitigation and adaptation
Reported

Targets related to climate change mitigation and adaptation

Reference: pages 58-59. Index lists E1-4 and paragraph 34 at page 58.

A table (page 58) sets 2025 target, 2025 performance and 2026 and 2030 targets: emission intensity target below 1,290 tCO2/MEUR, achieved at 1,270; fossil-free electricity in own operations above 90%, achieved at 91%; low-emission steel above 1.1%, 1.0% achieved, target not met (page 59); eco portfolio sales above 41%, 44% achieved.

The SBTi-approved targets are a 90% absolute scope 1 and 2 reduction and a 40% absolute scope 3 reduction by 2030 against 2023, and net-zero across the value chain by 2045 (page 58). The scope 3 target covers purchased goods and services, upstream transportation and distribution, use of sold products and downstream leased assets. Kalmar says it will need to drive its current climate actions more aggressively to reach the targets, especially the share of eco portfolio sales (page 59). It does not offset emissions, use carbon credits or apply internal carbon pricing, and external stakeholders were not consulted when setting targets (page 59).

E1-7(was E1-5)Energy consumption and mix
Reported

Energy consumption and mix

Reference: pages 42, 59, 61. Index lists E1-5 and paragraphs 37 and 38 and 40 to 43 at page 59.

Total energy consumption was 53,290 MWh in 2025 (2024: 56,260, restated). Fossil sources were 31,460 MWh (2024: 36,320), of which petroleum products 24,660 and natural gas 3,530. Acquired renewable electricity was 13,860 MWh, acquired renewable heat 4,560, self-generated solar 3,250 and biofuels 160 (page 59). Nuclear was 0 (2024: 2,170) and is reported only for assembly sites and innovation centres.

The renewable share was 41% (32% in 2024) and fossil-free electricity 91% (80% restated). Energy intensity was 30 MWh/MEUR, calculated on revenue of EUR 1,741 million. 2024 figures were restated after Kalmar widened the energy reporting boundary to more front-line units, and Q4 2025 energy data are estimated from Q4 2024 (pages 42, 59, 61).

E1-8(was E1-6)Gross Scopes 1, 2, 3 and Total GHG emissions
Reported

Gross Scopes 1, 2, 3 and Total GHG emissions

Reference: pages 60-61. Index lists E1-6 and paragraphs 44 and 53 to 55 at page 60.

Total GHG emissions (market-based) were 2,212,600 tCO2e in 2025 (2024: 2,214,100); location-based 2,220,600. Scope 1 was 7,300 tCO2e (2024: 8,100), scope 2 market-based 700 (1,300), scope 2 location-based 8,700 (9,200) and scope 3 2,204,600 (2,204,700) (page 60). Scope 3 therefore makes up over 99% of the total, driven by use of sold products and downstream leased assets (1,713,600) and purchased goods and services (419,300); upstream transportation and distribution was 71,700. Emission intensity was 1,270 tCO2e/MEUR (2024: 1,290). Base year 2023 total was 3,147,800.

Biogenic scope 1 emissions were 60 tCO2 and biogenic scope 2 emissions 1,390 tCO2 (page 60). Scope 3 purchased goods data are 60% supplier-specific, 28% weight-based and 12% spend-based. Methodology changes in 2025 led to restated 2023 and 2024 energy and scope 2 figures and corrections to 2024 scope 3 (page 61).

E1-9(was E1-7)GHG removals and GHG mitigation projects financed through carbon credits
Not Material
E1-10(was E1-8)Internal carbon pricing
Not Material
E1-11(was E1-9)Anticipated financial effects from material physical and transition risks and potential climate-related opportunities
Not Material

E5 – Resource Use and Circular Economy

E5-1Policies related to resource use and circular economy
Reported

Policies related to resource use and circular economy

Reference: page 63. Index lists E5-1 at page 63.

Kalmar's Code of Conduct commits the company to "mitigate adverse impacts on the environment and improve the environmental performance of its offering, operations and raw material sourcing". Under the Sustainability Policy Kalmar gives preference to materials that are better for the environment and rethinks material flows to promote "the transition away from extraction of virgin non-renewable resources", and commits to durable, long-lasting products, retrofits, modernisation and maintenance services (page 63).

The policy addresses responsible waste management but "does not take a stand on the waste hierarchy (prevention, reuse, recycling, recovery)" (page 63). The Business Partner Code of Conduct requires suppliers to monitor, control and appropriately treat solid waste and encourages them to reduce waste and natural resource use. The statement points to E1-2 for policy ownership and approval (page 63).

E5-2Actions and resources related to resource use and circular economy
Reported

Actions and resources related to resource use and circular economy

Reference: page 63. Index lists E5-2 at page 63.

As part of daily circularity actions Kalmar offers refurbishment and modernisation services (inspections, repairs, upgrades, automation and digitalisation) that keep equipment in operation longer; its products are reusable and Kalmar sells second-hand equipment and rents out equipment (page 63). In 2025 it continued to enhance services that extend product lifetimes and expanded refurbishment operations by establishing new sites and developing existing service locations (page 63).

At group level Kalmar "established a structured approach to integrating circular economy principles" and identified "game-changer initiatives", strategic high-impact projects to drive circularity transformation. It also developed its resource inflows KPI methodology to measure the quantity, type and origin of materials entering the system (page 63). No monetary resources are stated for these actions.

E5-3Targets related to resource use and circular economy
Reported

Targets related to resource use and circular economy

Reference: page 64. Index lists E5-3 at page 64.

Kalmar's circularity target is the eco portfolio share of sales: above 41% in 2025, achieved at 44%; above 44% for 2026, with the 2030 aim of an eco portfolio "aligned with evolving regulatory requirements, meeting climate targets and stakeholder expectations" (page 64). The eco portfolio includes service solutions such as lifecycle solutions, repairs and refurbishments, and 2025 eco portfolio sales were EUR 763 million, 44% of total sales (2024: 41%).

The statement links the target to less virgin material extracted and less waste produced along the value chain and points to E1-4 for more detail (page 64). The target is a sales-share measure rather than a measure of material use, recycled content or waste, and the report sets no separate numerical target for recycled steel or waste.

E5-4Resource inflows
Reported

Resource inflows

Reference: pages 64-65. Index lists E5-4 at page 64.

Total materials used were 114,430 tonnes in 2025 (2024 restated: 103,790). Steel structures were 67,790 tonnes (65,430), of which recycled steel was 11,690 tonnes (11,460), 17% of steel structures (18% in 2024) (page 64). Kalmar notes that batteries and other electronic components are also essential structures in its equipment.

Page 65 explains that in 2025 the inflows methodology moved from estimates based on average material content of sold products to the same verified data as the scope 3 purchased goods and services calculation, restating all 2024 metrics: total materials 6% lower, steel structures 2% higher and recycled steel 187% higher. The total steel in products is higher than reported, because steel in other purchasing categories is not included. Recycled steel comes from supplier data or conservative estimates.

E5-5Resource outflows
Reported

Resource outflows

Reference: page 64. Index lists E5-5 at page 64.

Kalmar's outflows are its products and the waste generated during assembly. On product circularity the statement gives three design principles: durability, with expected design lives of 20,000 to 80,000 hours depending on the product; repairability and reuse, supported by lifecycle solutions; and recyclability, since products are mainly steel, around 50% of weight in terminal tractors and about 90% in Bromma spreaders (page 64).

Waste figures are covered under the waste disclosure for this DR (see E5-5-Waste). The statement says waste is generated across the value chain, mainly at assembly sites and innovation centres in own operations, and that it is not material for the service sites, so waste data are published only for assembly sites and innovation centres (page 64). The statement gives no percentage of recyclable content for each product line.

E5-6Anticipated financial effects from resource use and circular economy-related impacts, risks and opportunities
Not Material
E5-5(was E5-5-Waste)Waste
Reported

Waste

Reference: pages 42, 64.

Total waste was 6,120 tonnes in 2025 (2024: 5,140). Hazardous waste was 290 tonnes (290): 50 diverted from disposal, all recycled, and 240 directed to disposal (220 incinerated, 20 other disposal). Non-hazardous waste was 5,830 tonnes (4,850): 5,240 diverted (all recycled, 4,520 in 2024) and 590 directed to disposal (landfilled 150, incinerated 370, other 70) (page 64).

Recycled waste totalled 5,290 tonnes, 86% of waste (2024: 89%); non-recycled waste was 830 tonnes, 14% (11%). Main waste streams are wood pallets, lubricant containers and cloths, mainly wood, plastic and textiles. Data come from waste records from contractor companies, and Q4 2025 figures are estimates (pages 42, 64). Waste data cover assembly sites and innovation centres only.

S1 – Own Workforce

S1-1Policies related to own workforce
Reported

Policies related to own workforce

Reference: pages 74-75. Index lists S1-1 at page 74.

Kalmar's Code of Conduct covers human trafficking, child and forced labour, health and safety, diversity and non-discrimination for all employees. A standalone Human Rights Policy (published in 2025) commits Kalmar to the International Bill of Human Rights, UN Global Compact, OECD Guidelines, UN Guiding Principles and the ILO Declaration, and covers health and safety, non-discrimination, non-harassment, freedom of association and collective bargaining, fair wages and working hours, freely chosen employment and child labour (page 74). It states Kalmar does not tolerate discrimination on grounds including ethnic origin, sex, sexual orientation, religion, age and disability (page 74).

The Employment Policy is supported by recruitment, learning, remuneration, flexible work and mobility policies, and HR policy changes are approved by the Leadership Team and communicated to the European Works Council (page 75). ISO 45001 certification covered 100% of assembly sites and innovation centres, but "the management system is not implemented across the entire organisation" (page 75).

S1-2(was S1-2 + S1-3)Engagement with own workforce and workers' representatives, existence of channels for own workforce to raise concerns or needs and approaches to remedy
Reported
2023 ESRS S1-2Processes for engaging with own workforce and workers' representatives about impacts
Reported

Processes for engaging with own workforce and workers' representatives about impacts

Reference: pages 75-76. Index lists S1-2 at page 75.

Engagement is direct and through representatives. Direct channels are the annual Compass engagement survey, monthly and quarterly surveys, the Leading Performance process with two formal reviews a year, and a learning platform (pages 75-76). Employee representatives are engaged through national and local trade unions, personnel representatives and works councils, and annually at the Kalmar Personnel Meeting in Europe (page 76). On-site audits include employee interviews on wages, overtime, health and safety, freedom of association, whistleblower access and forced and child labour (page 76).

Most sites have occupational health and safety committees, though "some smaller service sites do not have these committees" (page 76). Effectiveness is judged through engagement and leadership surveys and, for safety, the TRIFR. The Senior Vice President Human Resources holds operational responsibility for engagement; for safety it is the head of each legal entity (page 76).

2023 ESRS S1-3Processes to remediate negative impacts and channels for own workforce to raise concerns
Reported

Processes to remediate negative impacts and channels for own workforce to raise concerns

Reference: pages 76-78. Index lists S1-3 at page 76.

Employees can raise concerns with their line manager, local or group HR or the Ethics & Compliance team; safety observations go through established reporting channels; and serious misconduct can be reported through the externally hosted SpeakUp line, which allows confidential and, where legally permitted, anonymous reports, and is open to internal and external stakeholders (page 77). Kalmar "never imposes sanctions or other retaliation measures on the reporting person unless a report has been made in bad faith" (page 77).

Reports are evaluated confidentially; remedies are decided case by case, such as improved controls, training, disciplinary action or termination of third-party relationships. The E&C team tracks case trends and follow-up, and tests the SpeakUp channel's functionality. Health and safety incidents follow a separate site-managed process, and employees have the right to stop hazardous work without fear of retaliation (pages 77-78).

S1-3(was S1-4)Taking action on material impacts on own workforce
Reported

Taking action on material impacts on own workforce

Reference: pages 78-79. Index lists S1-4 at page 78.

Human rights related risks are addressed through ISO 45001, local action plans and risk assessments, engagement surveys, internal audits, training and communication (page 78). In 2025 Kalmar determined its salient human rights issues, published a standalone Human Rights Policy, defined a governance model with impact owners and carried out on-site audits at the Ipoh, Stargard and Shanghai assembly sites; the audits found only minor non-conformities relating to Kalmar's own operation (page 78).

Health and safety: work focused on system and data management (a global safety software expected fully operational by year end), competence development (Safety Leadership Training, new 5S+ programme) and communication (new Safety Vision and Policy). Kalmar Germany's frontline units "demonstrated unsatisfactory safety performance throughout the year" and an internal audit followed (page 79). Fair treatment: all 12 HR policies were updated, unbiased recruitment training began and a job architecture system supports pay gap analysis ahead of the EU Pay Transparency Directive (page 79). No actions with the primary purpose of delivering positive impacts were implemented (page 79).

S1-4(was S1-5)Targets related to own workforce
Reported

Targets related to own workforce

Reference: page 80. Index lists S1-5 at page 80.

A table sets targets for health and safety, human rights due diligence and fair treatment (page 80):

  • TRIFR below 4.5 in 2025: result 5.8, target not achieved; 2026 target below 4.0; the long-term aim is that everyone returns home safe every day.
  • Social audits of all six major entities by end 2026: three of six audited in 2025 (Ipoh, Stargard, Shanghai); Ottawa, Tampere and Ljungby follow in 2026. The 2030 aim is full transparency on human rights throughout the value chain.
  • Fair treatment: a 2025 target of a roadmap and actions embedded in HR processes; at least 32% women in senior leading roles in 2026 and at least 35% by 2030, with equal pay for work of equal value.

The Health and Safety Director sets and reports on the safety target (monthly internally, quarterly externally) and the Leadership Team approves it; the Vice President Sustainability owns the audit target (page 80).

S1-5(was S1-6)Characteristics of the undertaking's employees
Reported

Characteristics of the undertaking's employees

Reference: page 81. Index lists S1-6 at page 81.

Kalmar had 5,316 employees at year end 2025 (2024: 5,218), 1,017 women and 4,299 men, headcount from the HR system (the annual report elsewhere gives 5,300). 4,893 were permanent, 423 temporary and 224 non-guaranteed hours; 5,224 were full-time and 92 part-time. By region: AMER 507, APAC 1,441, EMEA 3,368. Countries with at least 10% of the workforce are Malaysia (779), Poland (710), Finland (560) and Spain (549) (page 81).

Employee turnover was 13% in 2025 (12% in 2024), 615 leavers, counting only own permanent employees leaving voluntarily (page 81). The statement notes the headcount differs slightly from the financial statements due to methodology.

S1-6(was S1-7)Characteristics of non-employee workers
Reported

Characteristics of non-employee workers

Reference: page 81. Index lists S1-7 at page 81.

Kalmar's external workforce includes temporary employees, consultants and agency workers, typically on temporary full-time contracts in software development, services, assembly, R&D and information management. It excludes subcontractors where Kalmar buys predefined deliverables or a service managed solely by the supplier (page 81). The table reports 171 non-employees in 2025 (2024: 186), giving a total workforce of 5,487 (2024: 5,404) (page 81).

The statement gives no breakdown of non-employees by type or region, and no figure for the typical duration of contracts.

S1-7(was S1-8)Collective bargaining coverage and social dialogue
Not Material
S1-8(was S1-9)Diversity metrics
Reported

Diversity metrics

Reference: pages 43-44, 80-82. Index lists S1-9 and paragraph 97 (a) and (b) at page 82.

At top management level, the Leadership Team has 7 men (64%) and 4 women (36%), and senior leading roles 82 men (71%) and 34 women (29%) (page 82). Employees by age: under 30, 843 (2024: 808); 30-50, 3,217 (3,180); over 50, 1,256 (1,230). Workforce gender split is 1,017 women and 4,299 men (page 81).

The gender diversity measure supports the target of at least 32% women in senior leading roles for 2026 and 35% by 2030 (page 80), and gender diversity in leadership is part of the PSP criteria (page 44). The Board is 38% women (page 43). No disability metrics are given.

S1-9(was S1-10)Adequate wages
Not Material
S1-10(was S1-11)Social protection
Not Material
S1-11(was S1-12)Persons with disabilities
Not Material
S1-12(was S1-13)Training and skills development metrics
Reported

Training and skills development metrics

Reference: pages 76, 79, 82. Index lists S1-13 at page 82.

97% of employees took part in performance reviews in 2025 (2024: 97%), 97% of women and 97% of men (2024: 97% and 96%) (page 82). Employees without access to the HR information system, mainly production and service site workers, are covered by a local performance and development plan process.

The metrics cover performance reviews only. The statement does not report average training hours per employee by gender, which is the second datapoint of S1-13, although learning and training are described under S1-2 and S1-4 (pages 76, 79).

S1-13(was S1-14)Health and safety metrics
Reported

Health and safety metrics

Reference: pages 42, 80, 82. Index lists S1-14 and paragraph 88 (b), (c) and (e) at page 82.

TRIFR was 5.8 in 2025 (2024: 5.5); recordable work-related accidents were 66 (55) and work-related fatalities 0 (0). 100% of own workers at assembly sites and innovation centres are covered by the ISO 45001 system (page 82). The rate is injuries per million hours worked and covers own employees and certain external contractors such as temporary and rental workers, but excludes subcontractors for lack of working hour data.

Kalmar states it cannot report days lost to work-related ill health, injuries and fatalities because "the company does not have access to the reasons why employees go on sick leave", and that it found shortcomings in its ill health reporting and "is currently unable to report reliable information" (page 82; also page 42). The 2025 TRIFR target of below 4.5 was missed (page 80).

S1-14(was S1-15)Work-life balance metrics
Not Material
S1-15(was S1-16)Compensation metrics (pay gap and total compensation)
Reported

Compensation metrics (pay gap and total compensation)

Reference: pages 82-83. The CSRD Content Index lists S1-16, Compensation metrics (page 95).

The gender pay gap was -4.9% in 2025 (2024: -1.1%), a negative figure meaning women's average base salary is higher, and the total remuneration ratio was 20.5 (10.8) (page 82). Kalmar says the higher female average is "explained by the much higher representation of females among white collar employees compared to blue collar workers", and that the global average "does not necessarily provide accurate information on the actual pay gaps between comparable jobs" (page 82).

The pay gap uses base salary only because data on all elements of reward are not globally available. The ratio compares the average employee with the highest paid employee excluding the CEO, and Kalmar is not able to provide the ratio for the median employee (pages 82-83).

S1-16(was S1-17)Incidents, complaints and severe human rights impacts
Reported

Incidents, complaints and severe human rights impacts

Reference: pages 82-83. Index lists S1-17 and paragraphs 103 (a) and 104 (a) at page 83.

The Ethics & Compliance team received 37 reports or concerns of potential misconduct in 2025 (2024: 35 restated), equal to 33 reported matters; 5 (14) constituted cases warranting investigation and 2 (3) were carried over, so 7 (17) total cases covering fraud, extortion, outbound corruption, conflicts of interest, embezzlement and bullying. Six cases were closed (13); allegations were substantiated in whole or part in 1 (7) (page 83).

Discrimination reports including harassment were 11 (12): 4 (8) to the E&C team and 7 (4) to HR. Severe human rights incidents were 0 (0), and "No material fines, penalties, or compensation for damages as a result of the incidents and complaints were paid" (page 83). The 2024 comparatives were restated to exclude cases originating from HR.

S2 – Workers in the Value Chain

S2-1Policies related to value chain workers
Reported

Policies related to value chain workers

Reference: page 85. Index lists S2-1 and paragraphs 17, 18 and 19 at page 85.

The Business Partner Code of Conduct covers business partners across the value chain with a supply chain focus. It requires a safe and healthy working environment, compliance with labour laws on minimum wages and working hours, and it prohibits modern slavery, forced and child labour and human trafficking (page 85). It is part of supplier contracts and purchase conditions and compliance is monitored through responsible sourcing practices.

The Human Rights Policy sets the principles Kalmar expects its business partners to follow and includes commitments to respect internationally recognised human rights, engage affected people and ensure adequate remedy. Both policies confirm commitment to the International Bill of Human Rights, UN Global Compact, OECD Guidelines, UN Guiding Principles and the ILO Declaration (page 85).

S2-2(was S2-2 + S2-3)Engagement with workers in the value chain, existence of channels for workers in the value chain to raise concerns or needs and approaches to remedy
Reported
2023 ESRS S2-2Processes for engaging with value chain workers about impacts
Reported

Processes for engaging with value chain workers about impacts

Reference: pages 85-86. Index lists S2-2 at page 85.

Kalmar's supplier sustainability assessments serve as engagement with supply chain workers. On-site audits are carried out for potential new suppliers and for ongoing monitoring of high-risk suppliers; audits of new suppliers are done by Kalmar staff, those of selected high-risk suppliers typically by a third party. They include interviews with supplier employees on wages, overtime, health and safety, freedom of association, whistleblower access and forced and child labour (page 85).

The Vice President Sourcing is responsible; effectiveness is judged by supplier assessment scores and corrective action plans (page 86). Kalmar also engages customers, whose employees operate its equipment, on equipment safety through on-site safety assessments, training and best practice sharing, with feedback used to judge effectiveness; the sales function is responsible (page 86).

2023 ESRS S2-3Processes to remediate negative impacts and channels for value chain workers to raise concerns
Reported

Processes to remediate negative impacts and channels for value chain workers to raise concerns

Reference: page 86. Index lists S2-3 at page 86.

Kalmar's Business Partner Code of Conduct requires suppliers and partners to maintain a reporting mechanism for their employees and others and to correct non-compliance; the existence of a grievance channel is requested in supplier self-assessments and checked during on-site audits (page 86). The SpeakUp line is open to all value chain workers and is promoted to dealers, agents and suppliers; workers can also report to their Kalmar contact. Kalmar tracks the channel by monitoring the variety of frequent users and tests its functionality.

If Kalmar caused or contributed to a human rights violation it "would apply its case-specific approach to remedy and corrective action", would not hinder access to other forms of remedy such as legal proceedings, and would judge effectiveness on feedback from the affected people (page 86). The statement describes the approach as what it "would" do and gives no case.

S2-3(was S2-4)Taking action on material impacts on value chain workers
Reported

Taking action on material impacts on value chain workers

Reference: pages 87-88 and page 92. Index lists S2-4 and paragraph 36 at page 87.

New direct suppliers must commit to the Business Partner Code of Conduct, pass a risk assessment, complete a third-party self-assessment and pass a Kalmar on-site audit. Self-assessments are mandatory for strategic suppliers, scored, with the lowest scoring prioritised for on-site audits (page 87). In 2025 three of five planned supplier audits were conducted, with minor and one moderate non-conformity found; of the six suppliers audited in 2024 "many of the non-conformities had been corrected, while some remained uncorrected" (page 87).

Audits at Kalmar's own assembly sites "revealed severe non-conformities within the supply chain, concerning subcontractors and their employees", including "irregularities in working permits and discrepancies in salary payments"; Kalmar initiated process improvements and a follow-up plan (page 87). No actions with the primary purpose of delivering positive impacts were taken in 2025 (page 88).

S2-4(was S2-5)Targets related to managing material negative impacts, advancing positive impacts, and managing material risks and opportunities
Reported

Targets related to managing material negative impacts, advancing positive impacts, and managing material risks and opportunities

Reference: pages 88, 93. Index lists S2-5 at page 88.

Kalmar targets better supplier sustainability performance through supplier self-assessments and on-site audits of suppliers identified as high-risk, tracked by the self-assessment participation rate, the development of supplier scores and the number of planned audits completed (page 88). It refers to the responsible sourcing target under business conduct (page 93), where 2025 coverage was 83% of direct spend and the sustainability performance score 3.4, against targets of above 78% and above 3.

The 2030 safety aim that everyone returns home safe every day also covers value chain workers who operate Kalmar's equipment, and customer feedback on equipment safety informs product design (page 88). The statement sets no numeric target for workers' wages or working hours in the supply chain.

G1 – Business Conduct

G1-1Business conduct policies and corporate culture
Reported

Business conduct policies and corporate culture

Reference: pages 90-91. Index lists G1-1 and paragraph 10 (b) and (d) at page 90.

Kalmar's risk-based compliance programme is run by the Ethics & Compliance (E&C) team, which conducts risk assessments, administers the SpeakUp channel and oversees sanctions and export control programmes (page 90). The Code of Conduct is the main instrument for ethical corporate culture; training is mandatory for all employees and managers, with extra anti-corruption courses for at-risk functions (sales, procurement, contract management, finance, HR, legal, risk management). Compliance policies include the Anti-Corruption Policy, Business Partner Code of Conduct, Business Partners Policy, Export Controls Policy and Trade Sanctions Policy (page 90).

Detecting runs through managers, HR, E&C and the externally hosted SpeakUp line under the EU Whistleblower Directive 2019/1937; the non-retaliation instruction applies to those who refuse to act unethically. All suspected serious misconduct is reviewed by E&C, investigated objectively, with corrective actions and Leadership Team review at bi-monthly panels (pages 90-91).

G1-2(was G1-2 + G1-3)Actions related to business conduct
Reported
2023 ESRS G1-2Management of relationships with suppliers
Reported

Management of relationships with suppliers

Reference: pages 91-92. Index lists G1-2 at page 91.

Kalmar works with about 1,000 direct suppliers and over 7,000 indirect suppliers. Its responsible sourcing programme has four areas: supplier engagement on decarbonisation, hazardous substances management, responsible minerals management and supplier sustainability assessments (page 91). It cites a 40% value chain emissions target by 2030 with supply chain emissions about 19% of the total. Responsible minerals work covers tin, tungsten, tantalum and gold, with cobalt and lithium being added, and high-risk suppliers are screened for the share of minerals from Responsible Minerals Initiative audited smelters (page 91).

Supplier assessment relies on the Business Partner Code of Conduct, self-assessments and third-party on-site audits, with social and environmental criteria used in selection (page 92). On payment practices the statement says: "Kalmar does not currently have a policy in place for preventing late payments" (page 92).

2023 ESRS G1-3Prevention and detection of corruption and bribery
Reported

Prevention and detection of corruption and bribery

Reference: page 92. Index lists G1-3 at page 92.

The compliance programme focuses on "detecting and preventing corruption and bribery" through regular training, clear policies and a whistle-blower system (page 92). No dedicated internal anti-corruption training took place in 2025, but a new Code of Conduct training with substantial anti-corruption and anti-bribery content was deployed. Code of Conduct training completion was 100% of all employees (2024: 93%) (page 92).

The E&C team works with Dealer Management on a Business Partner compliance programme that screens and trains new dealers and agents, with Code of Conduct training for those in high-risk jurisdictions. The Head of Ethics & Compliance updates the Audit and Risk Management Committee, the Leadership Team and subordinate teams on anti-corruption topics (page 92). The statement does not give a training breakdown by function at risk.

G1-3(part of MDR-T/GDR-T disclosures)Targets related to business conduct
Reported

Targets related to business conduct

Back-filled from the business conduct chapter, where targets are addressed as part of the MDR-T disclosures rather than as a numbered disclosure requirement. G1-3 became a standalone DR only in the 2025/2026 ESRS.

Reference: page 93.

A table sets out Kalmar's business conduct targets (page 93). Responsible sourcing programme: above 78% of direct spend and sustainability performance above 3 in 2025; achieved at 83% of direct spend and a score of 3.4; for 2026, improving supplier performance across supplier engagement, hazardous substances, supplier assessments and responsible minerals. All dealers and agents onboarded through the Business Partner compliance programme, with extra Code of Conduct training for those in higher risk jurisdictions, an annual rolling target met in 2025. The 2030 aim is a transparent and responsible value chain with suppliers and dealers adhering to all sustainability requirements and a Responsible Sales process implemented.

Progress is tracked by key area: data completeness for supplier engagement, declarations against REACH, RoHS, POPs and TSCA, conflict mineral reporting templates, and self-assessments and third-party audits. The Sustainability team and the E&C team set and communicate the targets (page 93).

G1-4Incidents of corruption or bribery
Reported

Incidents of corruption or bribery

Reference: pages 83, 93. Index lists G1-4 and paragraph 24 (a) and (b) at page 93.

"Kalmar did not receive any convictions nor fines for violation of anti-corruption and anti-bribery laws during 2025", and "No actions were required to address breaches in anti-corruption and anti-bribery procedures and standards" (page 93). The disclosure reports no convictions, no fines and no breaches requiring action.

Related case information sits under S1-17: the E&C team handled 7 cases in 2025, including "outbound corruption", and substantiated allegations in 1 of 6 closed cases (page 83). The statement does not give a separate count of corruption or bribery incidents involving own workers or business partners under G1-4.

G1-5Political influence and lobbying activities
Not Material
G1-6Payment practices
Not Material