Kempower Oyj
Material Topics
Sustainability statement, in full
The complete text of Kempower Oyj’s FY2025 sustainability statement is held here – 211 pages, captured from the published report. Every disclosure below also links to its own passage.
Value chain diagram – from the 2025 report (click to enlarge)
ESRS 2 – General Disclosures
GOV-1The role of the administrative, management and supervisory bodiesReported
The role of the administrative, management and supervisory bodies
Reference: pages 52-53.
Kempower's Board has eight non-executive members (Chair Vesa Laisi, Vice Chair Antti Kemppi and six others) supported by three committees: the Audit Committee, the Remuneration and Nomination Committee and the Technology Committee. The Global Leadership Team (GLT) had seven members on 31 December 2025, led by CEO Bhasker Kaushal (page 52).
Board composition in 2025 was 50% women and 50% men, and the company reports that 100% of Board members were independent, with Antti Kemppi and Teresa Kemppi-Vasama not independent of significant shareholders. Top management (the GLT) was 71% male and 29% female (page 52).
Sustainability oversight: the Board approves the ESG strategy and its targets; the COO has operative responsibility for the sustainability strategy and the CFO has ultimate responsibility for sustainability reporting. A Sustainability Team led by the COO and a cross-functional Sustainability Group coordinate delivery. The Audit Committee Chair is described as having good knowledge of the CSRD (pages 52-53).
GOV-2Information provided to and sustainability matters addressed by the undertaking's administrative, management and supervisory bodiesReported
Information provided to and sustainability matters addressed by the undertaking's administrative, management and supervisory bodies
Reference: page 53.
The Board of Directors receives an annual or as-requested update from the COO on the status and progress of the Sustainability Strategy, and the Audit Committee receives frequent updates on sustainability reporting from the CFO (page 53).
In 2025 the Board focused on the updated double materiality assessment (DMA) and the updated GHG emission inventory calculations with target setting. The GLT discussed and approved the updated sustainability strategy, the DMA, the climate targets and the updated GHG inventory. Upper management was trained on anti-corruption and bribery alongside the renewed Anti-Corruption Policy (page 53).
GOV-2(was GOV-3)Integration of sustainability-related performance in incentive schemesReported
Integration of sustainability-related performance in incentive schemes
Reference: page 54.
Kempower's Performance Share Plan for 2025-2027 bases rewards on absolute total shareholder return, Group revenue and CO2 emission reduction in relation to Group revenue. "The maximum reward is tied to an annual 10% CO2 reduction relative to revenue", and the target covers Kempower's own operations (page 54).
Weighting: the Revenue target is 60% and CO2 emission reduction 10% of the total 100%. CO2 reduction per revenue was introduced for the first time in the Performance Share Plan 2024-2026. Short-term incentives (annual bonus) rest mainly on Revenue, Order Backlog and EBIT, with revenue and order backlog weighted 70% for the CEO and GLT members (page 54). The Remuneration and Nomination Committee prepares the Remuneration Policy and the Board approves it.
GOV-3(was GOV-4)Statement on due diligenceReported
Statement on due diligence
Reference: page 55.
Kempower's statement on due diligence is a table mapping the five core elements of due diligence to the paragraphs of the statement (page 55):
- (a) embedding due diligence in governance, strategy and business model: SBM-3 and the policies E1-1, E5-1, S1-1, S2-1, S4-1 and G1-1
- (b) engaging with affected stakeholders: SBM-2, IRO-1, and S1-2, S2-2, S4-2
- (c) identifying and assessing adverse impacts: IRO-1
- (d) taking actions: E1-3, E5-2, S1-4, S2-4, S4-4 and G1-1 (whistleblowing process)
- (e) tracking effectiveness: E1-4, E5-3, S1-5, S2-5, S4-5
GOV-4(was GOV-5)Risk management and internal controls over sustainability reportingReported
Risk management and internal controls over sustainability reporting
Reference: page 55.
Kempower states it has risk management practices over sustainability reporting that cover all data collection, "ensuring the audit trail and completeness of the data". Risks are prioritised by likelihood and impact, and criticality is calculated by multiplying likelihood by consequence (page 55).
The main sustainability-reporting risks identified relate to data collection, data accuracy and the audit trail. Mitigation for the 2025 report includes the "Four Eyes Principle" (at least two people check the data), numeric data collected on a cloud-based platform, and internal assurance by the Group ESG Controller, who evaluates and confirms the accuracy of numerical data. Risk reporting goes to management quarterly as part of the Functional Review (page 55).
SBM-1Strategy, business model and value chainReported
Strategy, business model and value chain
Reference: pages 55-57.
Kempower designs and manufactures direct current (DC) fast-charging solutions for electric vehicles: distributed charging systems with power units and satellite dispensers, movable and station chargers, megawatt charging systems for trucks and buses, and the cloud-based ChargEye software, plus services, training and maintenance (page 55).
Total revenue was EUR 251.3 million, with no revenue from fossil fuel sectors, chemicals production, controversial weapons or tobacco. Primary markets are Europe and North America. At the end of 2025 Kempower had 825 employees: 588 in Finland, 100 in the US, 121 in other European countries and 16 elsewhere (page 55).
Value chain: upstream suppliers of components, assembly lines and transport; own operations covering R&D, product design, assembly and software, with production facilities in Finland and the United States; downstream deliveries, customers, end-users, maintenance and product recycling. The company commits to 99% recyclability of its products and shows its value chain as a diagram on page 57 (pages 56-57).
SBM-2Interests and views of stakeholdersReported
Interests and views of stakeholders
Reference: page 58.
Kempower presents a table of its key stakeholders with how engagement is organised, its purpose, the outcome and how the outcome is taken into account (page 58). The groups are: employees (performance cycle, Pulse Survey, whistleblowing channel, townhalls); customers such as distributors and retail chains (Kempower Academy, customer survey); investors, owners and the Board; suppliers and OEMs (Supplier Code of Conduct, supplier survey); operators and partners such as charge point operators and fleet operators; universities and research institutes; and authorities and politicians.
Examples of how outcomes are used: customer feedback is used to improve products; suppliers must comply with the Supplier Code of Conduct and the REACH and RoHS standards; Kempower and LUT University founded the Electric Mobility Research Center (EMRC).
SBM-3Material impacts, risks and opportunities and their interaction with strategy and business modelReported
Material impacts, risks and opportunities and their interaction with strategy and business model
Reference: pages 59-61.
Kempower's updated 2025 DMA found six material topics: climate change (E1), resource use and circular economy (E5), business conduct (G1), own workforce (S1), workers in the value chain (S2), and consumers and end-users (S4) (page 59). Changes in 2025: in S1 only training and skills development was kept under equal treatment and opportunities; in S2 only secure employment was kept under working conditions, with child and forced labor added; in S4 information-related impacts were deemed non-material while personal health and safety of end-users was added (page 59).
A summary table (pages 60-61) lists impacts, risks and opportunities by topic: E1 positive impacts from enabling low-carbon transport and negative impacts from Scope 2 and 3 emissions; E5 raw material use and waste; S1 working time and occupational safety; S2 supply chain labor risks; S4 product safety and greenwashing; G1 corporate culture. Topic-specific SBM-3 tables sit in each topical chapter (page 52).
The statement also says climate-related risks and uncertainties are not estimated to have had impacts on the 2025 financial statements, and that a climate scenario analysis was used to assess strategy resilience (page 59).
Resilience analysis content is also presented under E1-3-Resilience and E1-2-ScenarioAnalysis (see those entries).
IRO-1Description of the processes to identify and assess material impacts, risks and opportunitiesReported
Description of the processes to identify and assess material impacts, risks and opportunities
Reference: pages 62-64.
The DMA followed ESRS and EFRAG guidance; it was first carried out in 2023, reviewed in 2024 and updated in 2025 in four phases: understanding context, identifying IROs (143 sustainability impacts were evaluated), assessing IROs, and prioritising and validating them (pages 62-63). Impact materiality was scored on likelihood, scale, scope and irremediability, and financial materiality on likelihood and magnitude, each on a 0-5 scale with normalised values of 0-15; topics with either score of 12 or above were material (page 62).
Outcome: "six topics, thirteen sub-topics, and thirteen sub-sub-topics were deemed material" (page 62). Kempower's ESG risk framework was integrated into its enterprise risk management system in 2025.
On climate, the company states it updated its long-term climate risk and opportunity assessment in 2025, including a scenario analysis and a resilience assessment, using IPCC SSP1-1.9 and SSP4-8.5 (pages 62-63). On other environmental topics, ISO 14001 site assessments found "no significant aspects related to pollution, water or biodiversity" (page 62).
Climate-specific risk identification and scenario analysis is also presented under E1-2 (2025 ESRS numbering), see E1-2-ScenarioAnalysis.
IRO-2Disclosure requirements in ESRS covered by the undertaking's sustainability statementReported
Disclosure requirements in ESRS covered by the undertaking's sustainability statement
Reference: pages 65, 122-129.
Kempower's ESRS Content Index (pages 122-124) lists, by standard (ESRS 2, E1, E5, S1, S2, S4, G1), each disclosure requirement with its page number. A further list of datapoints deriving from other EU legislation (pages 125-129) gives a page for each datapoint reported and marks others "Not material" or "Omitted under the Quick Fix Delegated Act".
Page 65 states that pollution, water and marine resources, and biodiversity and ecosystems were identified as not material in the DMA update: Kempower does not use water in its operations or product assembly; its products comply with RoHS and REACH and use no metals from conflict areas; and its factories are located in pre-developed areas.
E1 – Climate Change
E1-1Transition plan for climate change mitigationReported
Transition plan for climate change mitigation
Reference: pages 77-79.
Kempower does not yet have a finished transition plan. "In 2025, Kempower conducted a comprehensive review of its greenhouse gas emissions inventory while simultaneously updating its climate targets", which established "an important foundation for the development of a more formalized climate transition plan, which Kempower intends to finalize in 2026" (page 77).
Climate ambitions are guided by the Paris Agreement and by reduction targets aligned with the criteria of the Science Based Targets initiative (SBTi). Climate planning is integrated into the business strategy and overseen by the Board and the GLT. The company is not excluded from EU Paris-aligned benchmarks (page 77).
Development of the formal plan was initiated during the year; no formal SBTi commitment has been made (page 78). Methodologies to quantify the contribution of each decarbonisation lever are under development, with quantitative disclosure planned for 2026. Kempower has no formal CapEx plan as defined by Delegated Regulation (EU) 2021/2178 (pages 78-79).
E1-2(was covered under ESRS 2 IRO-1)Identification of climate-related risks and scenario analysisReported
Identification of climate-related risks and scenario analysis
Back-filled from ESRS 2 IRO-1, where this content is disclosed in the FY2025 report (pages 62-65), with SBM-3 (page 59) and E1-4 (page 79). This disclosure requirement did not exist under the 2023 ESRS the report was prepared against.
Physical and transition risks: Kempower identified climate risks, "both physical and transition", by combining enterprise risk management, scenario and transition risk analysis and process-level environmental assessments (page 62). Page 64 tabulates transition risks (for example regulatory change in Europe and North America, rated Severe impact and High likelihood) and page 65 physical risks (hurricanes, floods affecting logistics, heat-related health and safety, each Minor to Medium).
Scope: all geographies with Kempower chargers, focused on North America and Europe, with the Durham (US) and Lahti (Finland) sites, the whole value chain and own operations; "no factors were specifically excluded". Horizons: short term 0-1 years, medium 1-5, long term over 5 (pages 62-63).
Scenarios: IPCC SSP1-1.9 (1.5°C) and IPCC SSP4-8.5 (up to 4°C), with regulation, market and technology drivers (pages 62-63). E1-4 (page 79) calls the high pathway SSP5-8.5. Risks are rated impact (1-5, minor under EUR 1 million to critical EUR 25 million) times likelihood (1-5) (page 63).
Results: low physical risk, higher transition risk; updated in 2025 (page 63).
E1-3(was covered under ESRS 2 SBM-3)Resilience in relation to climate changeReported
Resilience in relation to climate change
Back-filled from ESRS 2 IRO-1 (pages 63-65) and SBM-3 (page 59), where this content is disclosed in the FY2025 report. This disclosure requirement did not exist under the 2023 ESRS the report was prepared against.
Results: "Based on the assessment, Kempower's strategy is climate-resilient across short-, medium-, and long-term scenarios, considering the small to medium financial impacts and planned adaptation measures" (page 63). Climate risks and uncertainties are not estimated to have affected the 2025 or following-year financial statements (page 59).
Link to actions: the company states it mapped each mitigation action and resource disclosed under E1-3 to the relevant climate risks and transition events and evaluated effectiveness, timing and resource needs (page 63).
Uncertainty: "The key areas of uncertainty in the resilience analysis are scenario variability, data limitations, and unpredictable transition pathways" (page 63).
Capacity to adapt: for significant risks mitigation plans exist, and where assets or activities need significant adaptation, targeted mitigation actions and investment plans have been prepared. Corrective action plans apply to high and very high environmental risks, and distributed production in Finland and the United States lets operations continue if one site is disrupted (pages 64-65).
E1-4(was E1-2)Policies related to climate change mitigation and adaptationReported
Policies related to climate change mitigation and adaptation
Reference: page 77.
Kempower manages its climate-related impacts, risks and opportunities through its Environmental Policy, implemented under the ISO 14001 standard. Other guiding principles and commitments listed are the CSRD, the ESRS, the GHG Protocol, the UN Sustainable Development Goals, the UN Global Compact, the ISSB framework and the Finnish Energy Efficiency Act for large enterprises (1429/2024) (page 77).
The policy table says the Environmental Policy outlines commitments on climate change mitigation and adaptation, energy efficiency and renewable energy deployment, and GHG reduction targets by 2030 through reductions in Scope 2 emissions and a transition toward carbon-neutral logistics, while collaborating with key suppliers on emission reduction planning. It applies to own operations and the value chain, including all employees, suppliers and partners, is owned by Kempower Leadership Team and is available on the intranet. Policy development draws on management, employees, OEMs and regulators, and the policy is shared via the Kempower Academy and supplier training on the Salesforce platform (page 77).
E1-5(was E1-3)Actions and resources in relation to climate change policiesReported
Actions and resources in relation to climate change policies
Reference: pages 77-79.
To implement the Environmental Policy, Kempower names three emission-reduction actions: reducing the carbon footprint of its products, transitioning to renewable energy, and improving energy efficiency, applied to all operations unless otherwise stated (page 77).
2025 actions: the GHG inventory was restated; SBTi-criteria targets were set for Scopes 2 and 3 (Kempower reports no Scope 1 emissions); development of a formal transition plan began; ESG risk management was integrated into enterprise risk management; all Finnish locations moved to renewable heating and an energy audit was conducted; life cycle assessment calculations and material selection guidelines were introduced; supplier engagement and capacity building continued (page 78). Kempower's chargers delivered 2,128.8 MWh/day in 2025 against 1,084 MWh/day in 2024 (page 78).
Resources: non-capitalised amounts sit in note 2.5 and capitalised amounts in notes 3.1-3.3; Kempower holds a Green Revolving Credit Facility (note 4.3) and has no formal CapEx plan under Delegated Regulation (EU) 2021/2178. A more detailed resource assessment will follow with the transition plan in 2026 (pages 78-79).
E1-6(was E1-4)Targets related to climate change mitigation and adaptationReported
Targets related to climate change mitigation and adaptation
Reference: pages 79 and 75.
Kempower has shifted from multiple climate targets disclosed in 2024 to two near-term GHG reduction targets set in 2025 following SBTi criteria, aiming to contribute to limiting warming to 1.5°C (page 79). They are gross targets: removals, carbon credits and avoided emissions are not used to reach them.
- Scope 2 (market-based): 42.0% absolute reduction by 2030 from 1,380.8 tCO2eq in 2024; status in 2025 was -24.6%.
- Scope 3: 51.6% reduction per EUR million revenue by 2030 from 238.1 tCO2eq per EUR million in 2024 (53,271.8 tCO2eq in total), equal to 30,898.0 tCO2eq by 2030; status in 2025 was -15.5% (pages 79 and 81).
The targets "have currently not yet been formally submitted to the SBTi for approval". The baseline year is 2024, reviewed for representativeness against the GHG inventory and life cycle assessments. The GLT and Board were involved in setting them. The scenarios considered were IPCC SSP1-1.9 and SSP5-8.5 (page 79); the scenario analysis under IRO-1 names SSP4-8.5 (page 63).
E1-7(was E1-5)Energy consumption and mixReported
Energy consumption and mix
Reference: page 80.
Total energy consumption was 9,304.4 MWh in 2025 against 10,173.3 MWh in 2024 (page 80). By source:
- fossil: 2,922.3 MWh (31.4% of total) versus 4,733.3 MWh (46.5%)
- nuclear: 3,834.1 MWh (41.2%) versus 3,473.7 MWh (34.1%)
- renewable: 2,548.0 MWh (27.4%) versus 1,966.3 MWh (19.3%)
Energy intensity from activities in high climate impact sectors was 32.4 MWh per EUR million revenue, down from 40.0, on revenue of EUR 251.3 million. All Kempower activities are classed as high climate impact sector. All energy consumed at Finnish locations was 100% carbon-free by the end of 2025 through Renewable Energy Certificates and Guarantees of Origin; consumption for subsidiaries outside Finland is estimated using the Helsinki office as a proxy (page 80).
E1-8(was E1-6)Gross Scopes 1, 2, 3 and Total GHG emissionsReported
Gross Scopes 1, 2, 3 and Total GHG emissions
Reference: pages 81-84.
Kempower reports zero Scope 1 emissions. Scope 2 was 1,387.3 tCO2eq location-based and 1,041.4 tCO2eq market-based in 2025, against restated 2024 values of 1,654.9 and 1,380.8 (page 81). Scope 3 was 50,541.3 tCO2eq (-5.1%), led by purchased goods and services (29,533.0), use of sold products (12,249.1), upstream transport (4,567.6) and capital goods (2,234.8). Total market-based emissions were 51,582.7 tCO2eq versus 54,652.5 in 2024 (-5.6%); intensity was 205.3 tCO2eq per EUR million revenue (page 82).
Methodology follows the GHG Protocol with operational control; 4.8% of Scope 3 was calculated from primary data and biogenic CO2 is excluded for lack of data (pages 82-83).
The 2024 inventory was restated: total emissions of 54,652.5 tCO2eq against the 183,075.6 tCO2eq originally reported, mainly because category 1 fell from 126,615.5 to 29,533.0 and category 11 from 39,461 to 12,249.1 tCO2eq after methodology changes (pages 52, 83-84).
E1-9(was E1-7)GHG removals and GHG mitigation projects financed through carbon creditsReported
GHG removals and GHG mitigation projects financed through carbon credits
Reference: page 85.
Kempower cancelled carbon credits of 686 tCO2eq in 2025 (878 tCO2eq in 2024), split 50% removal and 50% reduction projects and 50% Gold Standard and 50% Verra, to offset business travel flight emissions. The projects are Verra's Rimba Raya Biodiversity Reserve Project (a nature-based biogenic sink) and Gold Standard's 400 MW Solar Power Project at Bhadla, Rajasthan; each covers 343 tonnes of CO2 (page 85).
The offsets in 2025 relate to flights taken in 2024. Kempower says it uses only internationally recognised parties and that project developers manage permanence risks such as leakage and reversal. Its targets are gross targets and do not rely on removals or credits (pages 79, 85).
E5 – Resource Use and Circular Economy
E5-1Policies related to resource use and circular economyReported
Policies related to resource use and circular economy
Reference: pages 87-88.
Kempower manages resource use and circular economy impacts, risks and opportunities through an Integrated Management System covering ISO 9001, 27001, 14001 and 45001 across all operations (page 87). The policy framework consists of the Environmental Policy, the Environmental Management System Manual (applied to 100% of activities), the Circular Economy in Product Development and Sourcing Policy, the Chemical Policy, Declarations of Conformity, the Recycling and Waste Management Handbook and the WEEE Directive guidelines (pages 87-88).
The Environmental Policy sets objectives including zero landfill waste in Finland by 2025, reducing production landfill waste globally and a 99% recyclability rate for new products. The circular economy guidelines aim for devices that are over 99% recyclable. The policy table gives scope, accountability (Global Leadership Team or the Sustainability Manager) and availability for each (page 88).
E5-2Actions and resources related to resource use and circular economyReported
Actions and resources related to resource use and circular economy
Reference: pages 89-91.
Actions named include (pages 89-91):
- Sustainable design: product sustainability guidelines first implemented in the first half of 2025; life cycle assessments and carbon footprints under ISO 14067, EN 50693 and the GHG Protocol.
- Material selection: a revised Material Selection Instruction published in 2025; suppliers must meet RoHS and REACH, provide conflict mineral information and Critical Raw Material statements; components are reused through a dismantling point.
- Packaging: a revised packaging material survey to plan plastics reduction; recyclability of satellite packages increased.
- Chemicals: management through the iChemistry system; chemical waste management training in Finland; a dedicated process for discarded lithium batteries.
- Waste: zero landfill waste in Finland in 2025; improved source separation in the US with nine waste fractions repurposed; participation in the Extended Producer Responsibility scheme.
- Repairability: refurbishment of power modules and reuse of components from disassembled products.
E5-3Targets related to resource use and circular economyReported
Targets related to resource use and circular economy
Reference: page 91.
Kempower's targets table (page 91), baseline year 2024, covering own operations and, where noted, the downstream value chain:
- recyclability rate of products: 99.6% for the Movable Charger, 99.7% for the Satellite and 99.7% for the Power Unit (continuous targets; the same levels reported for 2025)
- zero landfill waste in Finland (reported achieved in 2025)
- reduction of plastics in packaging by 50% by 2025 (status 35.3%)
- number of employee trainings on environmental management (the table lists 65 and 79 trainings)
Targets apply to key operations in Finland and the US, with slight variations due to US legislation; other subsidiaries are excluded for limited impact. The company states stakeholders were not involved in setting the current targets, and the recyclability rate is derived from a 2024 life cycle assessment of the main product configurations (page 91).
E5-4Resource inflowsReported
Resource inflows
Reference: page 92.
Resource inflows for Kempower's own production (assembly, testing and packaging of the Power Units, Power modules and Satellites) were 3,779.0 tonnes of products including packaging in 2025, against 3,136.8 tonnes in 2024. All are technical materials; Kempower sources no biological materials and says it does not categorise inflows further into technical materials (page 92).
Reused components, mainly refurbished Power Modules, were 181.8 tonnes in 2025, or 18.4% of the weight of delivered Power Modules, against 25.0 tonnes (3.6%) in 2024. Weights are based on bills of materials and units delivered in the ERP system. The statement notes that no water is used in assembly, with negligible emissions to atmosphere or soil (page 92).
E5-5Resource outflowsReported
Resource outflows
Reference: pages 92-93.
Kempower's key products are the Power Unit (a steel power cabinet with one to four Power Modules plus control and dynamic modules) and the Satellite dispenser (page 92). The end-of-life recyclability rate is 99.6% for the Movable Charger and 99.7% for both the Satellite and the Power Unit in Finland, and all product packaging materials are 100% recyclable (page 93).
Durability: the expected service life of Satellites, Power Modules and Cabinets is designed at 10 years under heavy-duty conditions, charging cables meet the IEC 62196 standard for 10,000 charging cycles, and products are retrofittable with backwards-compatible components and front-door access for maintenance (page 93).
Significant waste streams are described on page 93 and the waste figures are set out as E5-5-Waste.
E5-5(was E5-5-Waste)WasteReported
Waste
Reference: pages 93-95.
Kempower generated 313.0 tonnes of waste in 2025 against 233.8 tonnes in 2024; 305.8 tonnes were diverted from disposal and 7.2 tonnes sent to disposal (page 94). Hazardous waste was 0.1 tonnes, reported for Finland only because US definitions differ. Non-recycled waste was 65.0 tonnes, or 20.8% of the total, down from 96.0 tonnes (41.0%) (page 95).
Recovery in 2025: 247.9 tonnes recycled and 57.9 tonnes in other recovery operations; landfill was 7.1 tonnes, from the US and offices abroad, with zero landfill waste in Finland (page 94). Largest streams: metals 136.8 tonnes, cardboard 75.5, wood 36.4, energy waste 21.4 and plastics 15.0 (page 95).
On page 93 the company says wood waste fell in 2025 thanks to more efficient pallet collection and a new operator. Waste for other subsidiaries is estimated from one office hotel, and December values are estimated from January-November data (pages 94-95).
S1 – Own Workforce
S1-1Policies related to own workforceReported
Policies related to own workforce
Reference: pages 99-100.
Kempower's people activities are guided by its Labor and Human Rights Policy, which applies globally to employees, subcontractors, service providers and agency workers and is aligned with the Universal Declaration of Human Rights, the UN Guiding Principles, the ILO Declaration and the OECD Guidelines. It commits to freedom of work and prohibits forced, bonded and child labor, backed by a Modern Slavery and Human Trafficking Statement under the UK Modern Slavery Act 2015 (page 99).
Other policies: Code of Conduct, Diversity, Equity, Inclusion and Belonging (DEIB) Policy, Recruitment Policy, Learning Policy, Annual Bonus Plan, Health and Safety Policy and Harassment Policy. Occupational safety is governed by the Health and Safety Policy and an OHS Action Plan, with ISO 45001 in place (pages 99-100). A table gives each policy's contents, scope, accountability (Global Leadership Team or Board) and availability (page 100).
S1-2(was S1-2 + S1-3)Engagement with own workforce and workers' representatives, existence of channels for own workforce to raise concerns or needs and approaches to remedyReported
Processes for engaging with own workforce and workers' representatives about impacts
Reference: page 101.
Kempower engages its workforce mainly through a quarterly, anonymous Pulse Survey, which in 2025 added a theme on how people managers support, recognise and treat their teams fairly. Town Hall meetings are held roughly monthly, and the CEO has operational responsibility for employee engagement (page 101).
In Finland personnel have elected three representatives for production employees and two for office employees, who sit on the Personnel and Occupational Health and Safety Committee, which meets five times a year; representatives are elected every second year. Elected occupational health and safety representatives for office and production staff serve two-year terms (page 101).
Processes to remediate negative impacts and channels for own workforce to raise concerns
Reference: page 101.
Kempower has a Whistleblowing process and channel for complaints, appeals and concerns about negative impacts, designed to overcome formal and informal barriers to speaking up and accessible on the intranet homepage. The Group has insurance covering possible accidents, and third-party mechanisms and Occupational Health and Safety Services are accessible to the whole workforce (page 101).
Employees can also raise matters through the anonymous Pulse Survey and an open-door policy (page 102). Effectiveness is ensured through "continuous monitoring and evaluation"; records are kept as legally required, and in 2025 an internal communications campaign promoted the channel and it was included in mandatory Code of Conduct training (page 102).
S1-3(was S1-4)Taking action on material impacts on own workforceReported
Taking action on material impacts on own workforce
Reference: pages 102-103.
Actions address the material impacts and risks of excessive workload, work-life balance, occupational safety incidents, adequate wages and training (page 102).
- Working time: people managers monitor accumulated working hours; flexible working time and a hybrid model with remote work allowed where duties permit.
- Wages: a Rewarding Policy was published and will be cascaded during 2026; Kempower prepared for the EU Pay Transparency Directive.
- Health and safety: ISO 45001, health and safety walks, an updated chemical management program, safety suggestions via the Toyme app, mandatory occupational safety training and a Modified Work Policy (pages 102-103).
- Training: the Career Navigator framework, expanded Kempower College offerings and structured onboarding bootcamps (page 103).
Key actions planned for 2026 include publishing a Talent Journey program and phase one of AI tools (page 103).
S1-4(was S1-5)Targets related to own workforceReported
Targets related to own workforce
Reference: pages 103-104.
Kempower set targets for its own workforce with 2024 as the baseline year, covering all employees across 26 countries. A People and Culture Roadmap to 2030 is in place, and the company notes its ESG strategy was revised at the end of 2025 with KPIs and goals under dialogue with employee representatives (page 103).
Main targets and results (page 104):
- safety: zero workplace accidents; lost-time injury frequency (LTIF) 1.5 against 3.8 in 2024
- proactive safety observations: 750 against 391 (an annual target; calculation changed)
- employee Net Promoter Score (eNPS): target above 50, result 17.8 against 21
- Code of Conduct training: target 100%, result 84.7% against 87.5%
- valid first aid training: target 100%, result 46.4% against 57.5%
- trainee positions and first jobs for graduates: 41 against 52
S1-5(was S1-6)Characteristics of the undertaking's employeesReported
Characteristics of the undertaking's employees
Reference: page 105.
Kempower had 825 employees at year end 2025 (786 in 2024): 609 male, 185 female, 1 other and 30 not reported. By country: Finland 588, USA 100, other European countries 121 and other countries 16 (page 105).
Employee turnover was 15.0% (25.3% in 2024) and 121 employees left the Group (213 in 2024). The statement also gives headcount by contract type (permanent, temporary, non-guaranteed hours) and by full-time and part-time status, by gender and country. Figures come from HR systems and payroll, headcount at period end, and correspond to Note 2.4 of the financial statements (page 105).
S1-9(was S1-10)Adequate wagesReported
Adequate wages
Reference: page 106.
Kempower states that its wages are "above the national minimum wage and above the wages defined in collective bargaining agreements in all countries of operation and for every Kempower's employee" (page 106). In Finland, general pay increases under the collective agreement are implemented subject to local agreement with elected representatives and a Kempower-specific agreement. In subsidiaries, general increases follow the applicable collective bargaining agreement, and all countries follow an annual salary review process (page 106).
S1-12(was S1-13)Training and skills development metricsReported
Training and skills development metrics
Reference: page 106.
Kempower organised a total of 4,539.4 hours of training for its own employees in 2025 (page 106; page 96 states 4,539.5). The average number of training hours per employee was 5.5 in 2025 against 7.9 in 2024, which is 4,539 hours over 825 employees, and a table breaks the figure down by gender (page 106).
A table also gives the share of employees taking part in regular performance and career development reviews, by gender. The company describes a formal learning and development plan, regular goal and development discussions with managers, and priority themes of internationalisation, DEIB, English proficiency and collaboration with educational institutions (page 106).
S1-13(was S1-14)Health and safety metricsReported
Health and safety metrics
Reference: page 106.
All of Kempower's own workforce (100%) is covered by a health and safety management system based on legal requirements or recognised standards. There were 6 recordable work-related accidents in 2025 (8 in 2024), a rate of 4.4 per million working hours (5.6 in 2024). The table also gives cases of recordable work-related ill health and days lost, and fatality lines are left empty (page 106).
Health and safety data are tracked through a centralised system overseen by the Health and Safety Manager. Contractors and external workers are not included in the accident and ill-health metrics. The company's lost-time injury frequency was 1.5 in 2025 against 3.8 in 2024 (page 104).
S1-14(was S1-15)Work-life balance metricsReported
Work-life balance metrics
Reference: page 107.
All employees (100%) are entitled to family-related leave in both 2025 and 2024. Employees who took family-related leave were 9.0% of the total in 2025 (8.0% in 2024): 7.0% of men and 1.8% of women (page 107). Family-related leave covers maternity, paternity and parental leave, and the data come from the central HR system and are based on local legislation (page 107).
S1-15(was S1-16)Compensation metrics (pay gap and total compensation)Reported
Compensation metrics (pay gap and total compensation)
Reference: page 107.
The gender pay gap was 9.4% in 2025, up from 5.4% in 2024, measured as a percentage of the average pay level of male employees. The annual total remuneration ratio was 7.8 in 2025, down from 8.7 (page 107).
The pay gap is calculated on total remuneration (base salary, bonuses and other benefits), with salaries converted to euros and adjusted for completed working months; hourly wages use a standard divider of 158. Gender data are self-reported by employees (page 107).
S1-16(was S1-17)Incidents, complaints and severe human rights impactsReported
Incidents, complaints and severe human rights impacts
Reference: page 107.
"In 2025, zero human rights incidents were reported across all 12 whistleblowing cases" (page 107). Incidents, complaints and human rights impacts are discussed during the introductory training for new employees on their first day, and DEIB is included in training plans (page 107). The channels through which such cases are raised are described under S1-3 and G1-1 (pages 101, 121).
S2 – Workers in the Value Chain
S2-1Policies related to value chain workersReported
Policies related to value chain workers
Reference: pages 109-110.
Kempower's approach to value chain workers is set out in its Code of Conduct, Labor and Human Rights Policy and Supplier Code of Conduct, plus its Modern Slavery and Human Trafficking Statement. The policies prohibit child and forced labor, promote safe working conditions and equal pay, align with the UN Guiding Principles, ILO Declarations and OECD Guidelines, apply to all suppliers and are publicly available (page 109).
The CEO holds ultimate accountability, with Board approval of policies. Suppliers must agree to the Supplier Code of Conduct, tracked through the supplier portal. In 2025, "zero cases of non-respect of the UN Guiding Principles on Business and Human Rights, ILO Declaration on Fundamental Principles and Rights at Work or OECD Guidelines for Multinational Enterprises" involving value chain workers were reported (page 110).
S2-2(was S2-2 + S2-3)Engagement with workers in the value chain, existence of channels for workers in the value chain to raise concerns or needs and approaches to remedyReported
Processes for engaging with value chain workers about impacts
Reference: page 110.
Kempower's supply chain has about 200 suppliers in more than 20 countries. It engages through one-to-one dialogue, remote and on-site audits, workshops and industry events, with the level set by supplier categorisation based on business criticality and risk including human rights risks. Audits follow an annual plan made by the Supplier Quality Team with Purchasing; on-site audits may include visits to workers' dormitories (page 110).
The COO has operational responsibility for engagement with value chain workers. Engagement most often occurs with employer representatives rather than the workers directly (page 110).
Processes to remediate negative impacts and channels for value chain workers to raise concerns
Reference: page 110.
Kempower's Whistleblowing channel lets individuals raise concerns anonymously and confidentially without fear of retaliation, and is publicly accessible on the website and through the Supplier Portal. Suppliers can also contact the Purchasing Team directly (page 110).
Non-compliance is handled case by case: suppliers must submit corrective actions after audit findings, Kempower runs follow-up meetings, and may ultimately terminate the partnership. If Kempower identifies a negative human rights impact in its own operations it says it will act immediately to prevent further harm and address existing issues (page 110).
S2-3(was S2-4)Taking action on material impacts on value chain workersReported
Taking action on material impacts on value chain workers
Reference: page 111.
In 2025 Kempower established a Group-wide cross-functional Human Rights Working Group, meeting about every two months, and conducted a third-party ESG audit of a supplier in South-East Asia covering human and labor rights, health and safety, environmental matters and management systems, with follow-up procedures established (page 111).
The supplier risk assessment process was reviewed in line with OECD guidelines, and the Code of Conduct training was updated with a human rights section. The Whistleblowing channel was made visible to external stakeholders via the Supplier Portal and a QR code. Other actions: contractor health and safety training and guidelines, systematised conflict minerals information requests, and emphasis on ISO 14001 and ISO 45001 in supplier selection. For 2026 the company aims to expand capacity-building (page 111).
S2-4(was S2-5)Targets related to managing material negative impacts, advancing positive impacts, and managing material risks and opportunitiesReported
Targets related to managing material negative impacts, advancing positive impacts, and managing material risks and opportunities
Reference: page 112.
Kempower tracks effectiveness through three indicators (page 112):
- share of suppliers having signed the Supplier Code of Conduct: target 95% (continuous), 64% in 2025 against 95% baseline in 2024
- audits of suppliers by classification: target 95% of A and B suppliers audited, 59% in 2025
- sustainability survey response rate: target 100% (continuous), 41% in 2025 against 89% in 2024
The company says suppliers have not been explicitly consulted in setting the targets but were engaged as part of the DMA. No separate target exists for data quality, which is managed through regular quality management interaction (page 112).
S4 – Consumers and End-users
S4-1Policies related to consumers and end-usersReported
Policies related to consumers and end-users
Reference: pages 114-115.
Kempower applies policies on information security and privacy and runs rigorous product development processes to manage end-user impacts. All products comply with the Low Voltage and Radio Equipment directives and the RoHS and REACH directives, and meet the IEC 61851 standard family. Preventive measures include Design Failure Mode and Effect Analysis and mandatory quality planning for all new projects (page 114).
An Integrated Management System covers ISO 9001, 14001, 27001 and 45001. The policy table lists the Information Security Policy (aligned with ISO 27001, NIS2, PCI-DSS and GDPR), the Privacy Policy and the Data Processing Policy. Kempower commits to the UN Guiding Principles, the ILO Declaration and the OECD Guidelines, and reports zero violations in 2025. Accessibility, such as control design and installation heights, is considered for people with disabilities and elderly users (page 115).
S4-2(was S4-2 + S4-3)Engagement with consumers and end-users, existence of channels for consumers and end-users to raise concerns or needs and approaches to remedyReported
Processes for engaging with consumers and end-users about impacts
Reference: page 116.
Customer-centricity is a core strategic consideration, and Kempower engages customers and end-users through a structured multi-channel approach. Channels include direct dialogue, surveys, idea boxes, industry fairs and co-operation projects, a Key Account Management framework, customer satisfaction surveys one to two times per year, social media monitoring, and indirect end-user feedback through customers and distributors (page 116).
Kempower applies open innovation in product development, collaborates with EV associations and publishes usability studies as whitepapers. The CEO and Leadership Team hold overall responsibility, and the Chief Marketing Officer and Marketing Team run the satisfaction survey. Vulnerable groups are considered in design, for example ease of use for people with disabilities (page 116).
Processes to remediate negative impacts and channels for consumers and end-users to raise concerns
Reference: page 116.
Kempower maintains a certified installation and maintenance partner system with training through the Kempower Academy, and a Support portal for technical issues, warranty claims and spare parts. In a potential safety incident or product recall it collaborates with local authorities (page 116).
End-users can raise data protection concerns by contacting Kempower by email; Data Subject Requests and response times are monitored. The publicly available Whistleblowing channel lets anyone report unethical behavior anonymously. If a negative human rights impact related to end-user data is found, a designated team investigates immediately, and Kempower may provide compensation or remedies such as guarantees of non-repetition (page 116).
S4-3(was S4-4)Taking action on material impacts on consumers and end-users, and approaches to managing material risks and pursuing material opportunities related to consumers and end-users, and effectiveness of those actionsReported
Taking action on material impacts on consumers and end-users, and approaches to managing material risks and pursuing material opportunities related to consumers and end-users, and effectiveness of those actions
Reference: pages 116-117.
Actions in 2025 include an updated ChargEye error-code troubleshooting guide, the broader launch of a whitepaper showing charger uptime above 99% across more than 13 million charging sessions and an 87% session success rate, and expanded ChargEye dashboards for customers and maintenance partners (pages 116-117). The annual customer satisfaction survey gave an NPS of 47 (page 117).
On data security, Kempower reported zero severe privacy incidents or breaches, maintained ISO 27001 certification, advanced NIS2 compliance and fully implemented multifactor authentication for ChargEye and MyKempower. It also announced a first North American university partnership with the FREEDM Systems Center and opened a research unit in the Electric Mobility Research Center with LUT University; R&D expenses were 8% of 2025 revenues (page 117).
S4-4(was S4-5)Targets related to managing material negative impacts, advancing positive impacts, and managing material risks and opportunitiesReported
Targets related to managing material negative impacts, advancing positive impacts, and managing material risks and opportunities
Reference: page 117.
Kempower states it "has not currently set measurable outcome-oriented targets concerning the topic of consumers and end-users, but it tracks the effectiveness of policies and actions in relation to material sustainability-related impacts, risks and opportunities" (page 117).
Tracking depends on the action: achieving a certain level in test results, measuring participation in meetings and working groups, measuring course availability, completion rate and training hours, or assessing the development of customer satisfaction (page 117).
G1 – Business Conduct
G1-1Business conduct policies and corporate cultureReported
Business conduct policies and corporate culture
Reference: pages 120-121.
Kempower's culture is built on the values Together, Impact, Integrity and Courage, and in 2025 it launched a "Culture 2.0" project gathering insights through employee discussion groups, management interviews and workshops (page 120). The Code of Conduct was updated in 2025 with sections on financial misconduct and fraud, human rights and trade sanctions; completion of the Code of Conduct e-learning was 84.7% of employees (page 121).
Kempower has zero tolerance for corruption and bribery and launched a separate Anti-Corruption Policy in 2025 in line with international standards including the UN Convention against Corruption. A dedicated e-learning training was completed by 90% of office employees, and a gift and hospitality reporting process was introduced. The functions most at risk are sales, business development, procurement, supply chain, services, partnerships and logistics. In 2025 there were no reported incidents, convictions or fines related to corruption or bribery (pages 120-121).
A Whistleblowing Policy compliant with Directive (EU) 2019/1937 and a channel for employees and external stakeholders are in place; reports are reviewed by the General Counsel and internal auditor and substantiated cases go to the Audit Committee (page 121).
G1-2(was G1-2 + G1-3)Actions related to business conductPartly reported
Management of relationships with suppliers
Reference: page 121.
Procurement at Kempower is guided by the Procurement Handbook, rooted in the Code of Conduct, related-party guidelines and the Anti-Corruption Policy, and the company aims to build trust-based supplier relationships through open communication, transparency and cooperation (page 121).
All suppliers must adhere to the Supplier Code of Conduct and complete a sustainability survey, and new suppliers undergo a separate pre-assessment. In 2025 Kempower strengthened supplier due diligence, especially for suppliers in high-risk regions, evaluating sustainability, labor rights, safety, legal compliance and anti-bribery. Engagement uses day-to-day dialogue, self-assessments, surveys, internal reviews and audits, and further detail is given under S2 (page 121).
G1-3(part of MDR-T/GDR-T disclosures)Targets related to business conductReported
Targets related to business conduct
Back-filled from the business conduct chapter and the S1-5 targets table, where targets are addressed as part of the MDR-T disclosures rather than as a numbered disclosure requirement. G1-3 became a standalone DR only in the 2025/2026 ESRS; this report was prepared against the 2023 ESRS.
A stated target exists: "Share of employees having conducted the Code of Conduct training" has a continuous target of 100%, with 84.7% in 2025 against 87.5% in the 2024 baseline (page 104). The Code of Conduct covers anti-corruption, fair competition and sanctions compliance (page 121).
Effectiveness is tracked: Code of Conduct training attendance and completion are monitored annually, completion of the dedicated Anti-Corruption Policy e-learning was 90% for office employees (page 121), and regular surveys and stakeholder feedback are used to evaluate the corporate culture. The company adds that the next phase of culture development "will focus on aligning our targets with Kempower's strategic direction" (page 120).
The G1 chapter sets no separate numerical target for corruption incidents.